JAJALE 66 GPH Submersible Hydroponic Water Pumps 100pcs
Units Sold: 13
66 GPH Adjustable Submersible Fountain Pond Aquarium Water Pump 100 pcs
Key Product Features
1. Beautiful new look, safe, reliable and super quiet. stainless steel impeller shaft is resistant to corrosion. Low power consumption. Epoxy sealed, high grade ABS pump housing, sand resistant. Stator Bobbin wound with pure copper wiring, not cheaper aluminum. UL-certified plug and copper-enameled power cables.
2. Easy to install and clean. No tools required to install, uninstall or disassemble. Includes 5 ft of cord for easy power access. The 3 strong suction cups keep it in place, so that it can be stuck to the side of the aquarium or other smooth flat surface, either vertically or horizontally.
3. Adjustable flow rate. Max Flow Rate: 66 GPH, Max Lift Height: 1.9 ft. As flow is increased, lift is decreased and vice versa.
4. This submersible pump is designed for small to medium-sized aquariums, tabletop fountains, water gardens and hydroponic systems. It is backed by 12-month warranty and professional after-sale service within 24 hrs.
5. Compact yet powerful. Dimensions: 1 3/4 x 1 1/2 x 1 1/4 in. Fits 1/4″ ID tubing connector.
The 66 GPH DB-300 Submersible Pump is an excellent choice for meeting the circulation needs of any small freshwater aquarium, desk fountain, or other indoor water features. The small profile size makes the pump easy to hide or disguise. It has adjustable flow and is easy to clean. It can also be used to provide bubbles under water if the pump body is mounted outside of the water.
– 66 GPH – 250 L/H
– Max Head 1.9 ft (60cm).
– Fits 1/4″ (6.4mm) ID Tubing
– 5 ft (1.5m) Non-Polarized Plug (US) UL Approved
– 120 Volt AC – 60Hz
– 2.5w Power Consumption
– 1 3/4 x 1 1/2 x 1 1/4 in
– Suction-cup Base
– 66 GPH pump
– 1/4″ Adapter
These products are designed with attention to detail and using best practices. They meet all relevant electrical appliance safety standards in the U.S. They have an authentic brand and are manufactured directly by our own factory.
Our products have a beautiful new look while sporting a safe, reliable electrical design that is super quiet.
We use epoxy resin to encapsulate the pump housing around the motor for fully sealed insulation, never using sand as a cheap replacement.
The stator is fully wound with standard pure copper wire to ensure sufficient flow, pressure and stability.
The pump housing is made of new, high-grade ABS polyethylene and is never made of cheap recycled plastics.
Power cables and plugs are made of UL-certified copper enameled wire instead of the cheap, unsafe aluminum wires or copper clad aluminum.
1. Make sure the input voltage is the same as rated on the pump label before use.
2. The pump is only recommended for freshwater use.
3. The pump can be used in 32-95 degrees F (0-32 degrees C) water.
4. Unplug the power when installing, uninstalling or cleaning the pump.
5. In the event of a damaged power cord, turn off the pump immediately.